Are you a shop owner? Are you looking for a scanner to track inventory or run POS? Check out this laser scanner with a cradle. It's easy to install and operate features.
Features 1. The overall design of the product is delicate and exquisite. The head of the scanner, the handle, and the base are protected by rubber, and the scientific inside struck design enhanced the crashproof function, which is unmatched by the common wireless barcode scanner in the market. 2. There is a new leap in the code reading function. With the new technologies of the decoding chip, the scanner can be read and transfer more quickly. 3. The easy setting procedure can make sure the client learn to use it quickly, which avoid the complex setting when you use it. 4. The big capacity battery is 1.5 times of the common scanner, so our scanner can be use for a longer time. 5. The far transmission distance, i.e. 500m in the empty space(normally 50-200m in the room, which is according to the indoor structure. 6. Super larger memory: it can store 10,000 - 30,000 of barcodes. 7. Powerful matching function: supporting 3 kind of work modes (one to one, one –to many and many-to-one). One receiver can receive messages from 255 pieces of the scanner at the same time. 8. Uploading the date intelligently, it can upload the date breakpoints continuingly (the scanner will store the data in its own memory when the date can not send to the computer successfully. And upload the date to the computer when it is convenient) 9. The stand-by mold technology can save the power, so it can use longer time.
Function explanation: 1. Storage function: the scanner will automatically store the data in its own memory when the date can not upload to the computer successfully. (when the transfer distance is too far or there are other signal interruption). It guarantees the date will not be lost. 2. Low power alarm function: If the scanner enters the standby state when it is reading the barcode or when you just turn on it automatically and the indicators flicker continuingly at the meantime, it means the battery needs to be charged. 3. Stand-by state: when it is not used, it will enter the standby state automatically. 4. Charging: Inserting the crystal plug into the interface of the scanner and inserting the usb plug into the computer’s usb interface. When the indicator is red, it means it is being charged. When the red indicator flames out, it means the battery is charged fully.
Parameters Source Type: Visible laser diode, wavelength 650nm Trigger Mode: Manual Scan Mode: Single Scan Scan speed: 100 ± 2 times Resolution: ≥ 4mil Print Contrast: 30% minimum reflectance difference. BER: 1/5000000 Charging input voltage: DC 5VDC ± 0.25 V Power: 100 mW (work): 400 mW (maximum instantaneous) Current: 20 mA (work): 100 mA (maximum instantaneous) Standby current: <20uA The light intensity: 3000-12000Lux Depth of field: 5mm-630mm Scanning angle: ± 60 ° ± 65 ° ± 42 ° (left and right, front and rear, turn) Decoding capability: UPC / EAN / JAN, UPC / EAN with Supplementals, UCC / EAN 128, Code 39, MSI, Code11, Code 39 Full ASCII, Code 39 TriOptic, Code 128, Code 128Full ASCII, Codabar, Code93, Discrete2of5, IATA, RSSvariants, Codabar, Chinese2of5, Inteleaved2 / 5, Interleaved2of5, the postal code and other countries Interpersonal GM - dimensional bar code -Lift method: Buzzer, LED indicator. Scanner: L * W * H: 158mm * 68mm * 96mm Weight: 200g Charging Interface Type: RJ-45 crystal head, length 1 m (with a USB charging cable, when the red light is on, its charging and when the red light is off the battery is full) Shell Material: ABS + PC Temperature: 0 ℃ to 50 ℃ (work): -40 ℃ to 60 ℃ (storage) EMC EMC: EN55022, EN55024 Electrical Safety: EN60950-1 Enclosure class: IP54 Seismic capacity: multiple drops from a height of 2 m to concrete still work